NETGEAR 7300 Series - Page 327

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-39
202-10009-01_060204
Switching config protocol create
<groupname>
Global
Config
vlan protocol group <groupname>
Switching config protocol delete <groupid> Global
Config
vlan protocol group remove
<groupid>
Switching config protocol protocol add
<groupid> <protocol>
Global
Config
vlan protocol group add protocol
<groupid> {ip | arp | ipx}
Switching config protocol protocol remove
<groupid> <protocol>
Global
Config
no vlan protocol group add protocol
<groupid> {ip | arp | ipx}
Switching config protocol vlan add <groupid>
<vlan>
VLAN
database
protocol group <groupid> <1-4094>
Switching config protocol vlan remove
<groupid> <vlan>
VLAN
database
no protocol group <groupid>
<1-4094>
Switching config protocol interface add
<groupid> <slot/port / all>
Interface
Config
protocol vlan group <groupid>
Switching config protocol interface remove
<groupid> <slot/port/all>
Interface
Config
no protocol vlan group <groupid>
Switching config protocol interface remove
<groupid> <slot/port/all>
Global
Config
protocol vlan group all <groupid>
Switching config protocol interface remove
<groupid> <slot/port/all>
Global
Config
no protocol vlan group all <groupid>
Switching config garp gmrp adminmode
<enable/disable>
Privileged
EXEC
set gmrp adminmode
Privileged
EXEC
no set gmrp adminmode
Switching config garp gmrp interfacemode
<slot/port/all> <enable/disable>
Interface
Config
set gmrp interfacemode
Interface
Config
no set gmrp interfacemode
Global
Config
set gmrp interfacemode all
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax