NETGEAR 7300 Series

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-44 IS CLI Mapping
202-10009-01_060204
Security show radius summary Privileged
EXEC
show radius [servers]
Security show radius server summary Privileged
EXEC
Security show radius server stats <ipaddr> Privileged
EXEC
show radius statistics <ipaddr>
Security show radius accounting summary Privileged
EXEC
show radius accounting [statistics
<ipaddr>]
Security show radius accounting stats
<ipaddr>
Privileged
EXEC
Security show radius stats Privileged
EXEC
show radius statistics
Security clear radius stats Privileged
EXEC
clear radius statistics
Security config dot1x adminmode <enable/
disable>
Global
Config
dot1x system-auth-control
Global
Config
no dot1x system-auth-control
Security config dot1x port initialize <slot/
port>
Privileged
EXEC
dot1x initialize <slot/port>
Security config dot1x port reauthenticate
<slot/port>
Privileged
EXEC
dot1x re-authenticate <slot/port>
Security config dot1x port controldir <slot/
port/all> <both/in>
Removed
Security config dot1x port controlmode
<slot/port/all> <forceunauthorized/
forceauthorized/auto>
Global
Config
dot1x port-control all
{force-unauthorized |
force-authorized | auto}
Global
Config
no dot1x port-control all
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax