NETGEAR 7300 Series

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-46 IS CLI Mapping
202-10009-01_060204
Security config dot1x port users add <user>
<slot/port/all>
Global
Config
dot1x user <user> {<slot/port> | all}
Security config dot1x port users remove
<user> <slot/port/all>
Global
Config
no dot1x user <user> {<slot/port> |
all}
Security show dot1x summary Privileged
EXEC
show dot1x [{summary {<slot/port> |
all}} | {detail <slot/port>} | {statistics
<slot/port>} {users <slot/port>}]
Security show dot1x port summary <slot/
port/all>
Privileged
EXEC
Security show dot1x port detailed <slot/
port>
Privileged
EXEC
Security show dot1x port stats <slot/port> Privileged
EXEC
Security show dot1x port users <slot/port> Privileged
EXEC
Security clear dot1x port stats <slot/port/all> Privileged
EXEC
clear dot1x statistics {<slot/port> | all}
PoE config poe port adminmode Global
Config
poe
PoE config poe port priority <slot/port/
all><high/medium/low>
Global
Config
poe priority <high/medium/low>
PoE config poe port limit <slot/port/
all><3-16>
Global
Config
poe limit <3-16>
PoE config poe usagethreshold
<0-100>
Global
Config
poe usagethreshold <0-100>
PoE show poe port info Privilege show poe port <slot/port, all>
PoE show poe info Privilege show poe
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax