User Administration Configuration
146 A29247-X6-X-6-7670
Edit user
You modify users using the same dialog as described above. The only difference is that you
cannot modify the user name field. To edit a user
• select from the menu ’User’ -> ’Edit user’ or
• select ’Edit user’ from the context menu
Note: The modification of the permission group may cause a modiffcation of the UI man-
ager group, and therefore the behaviour of PRISMAproduction outside the Explorer
(see ’Permissions’).
Copy user
You can copy the currently selected user in the table to create a new user. All settings apart
from user name and password are copied in this case. The user name is automatically cre-
ated and can be modified immediately.
To copy a user
• select from the menu ’User’ -> ’Copy user’ or
• select ’Copy user’ from the context menu or
Password and Repeat If a password is set, it must exactely match the string in the ’Re-
peat’ field.
First name, Last name... Personal data of the user, where first and last name can have
up to 64 characters.
Email For the email address only letters, numbers and special charac-
ters @ _ . - (at symbol, underscore, dot, hyphen) are allowed.
Auto-Login on the PRISMA
Master
Indicate if an auto-login to PRISMAproduction is preformed for
this user or not.
Note: The PRISMA user management automatically creates a
system identification for accounts, which are allowed to auto-log
on to PRISMAproduction. The system identification is deleted, if
the the PRISMA user is deleted. If a system identification of the
same name already exists, an error message is issued. Auto-lo-
gin still works but the system user will not be modified by the
PRISMA user management. It will not be deleted, if the PRISMA
user is deleted.
The PRISMA user mangement is aware of the users created by
itself and will only modify these.
To Next Page
Loading...
