Oce PRISMAproduction - Page 310

PJM in Command Line Mode Print Job Manager
298 A29247-X3-X-6-7670
Pdsduplx= Specifies default Simplex/duplex infor-
mation:
-1 use information from FORMDEF
0 Simplex
1 Normal duplex
2 Tumble duplex
3 Rsimplex
4 Rnormal duplex
5 Rtumble duplex
6 Zigzag normal
7 Zigzag tumble
9 Rzigzag normal
10 Rzigzag tumble
Default: as defined in printer configura-
tion
APA Settings -> Options -> Page
Sequence
Formdef= Form Definition
Default: F10101
APA Settings -> Resources ->
Form Definitions
Pagedef= Page Definition
Default: P1STD3
APA Settings -> Resources ->
Page Definitions
Fonts= List of the default font, if no other fonts
are specified.
APA Settings -> Resources ->
Preloaded Fonts
SPSLib= List of individual resource paths. APA Settings -> Resource Librar-
ies -> Common Libraries
Info1= Additional parameter 1 APA Settings -> Custom Settings
Use for POD and LCDS only with
Oct
Info2= Additional parameter 2
... ...
Info20= Additional parameter 20
JDL_Name= Name of JDL used for start command
of this LCDS job
LCDS Setting -> General
JDE_Name= Name of JDE used for start command
of this LCDS job
LCDS Setting -> General
File_From= Tape / Cartridge File to be printed from
( Tape / Cartridge input only )
Default: 1
LCDS Setting -> General
File_To= File to
Default: 0 ( = All Files )
LCDS Setting -> General
Parameter General Description
Options and Syntax
Default
Description of the correspond-
ing GUI option
additional notes