Print Job Manager PJM in Command Line Mode
A29247-X3-X-6-7670 299
PrinterTyp= Printer type from LCDS JSL/DJDE
STOCKSET handling point of view
Fanfold: Fanfold Printer: Stockset is ig-
nored
SCT: SCT Tool is used to define input
bin numbers in resulting AFP print file
MediaName: Medianames (Stock-
names) are used directly (without SCT)
in AFP file. Not for PS55/75 or equiva-
lent. Designed for PS 158 or higher
LCDS Setting -> Feed
SC_Table= SC-Table : Name of SCT Table to be
activated with PJM Call ( for PrinterT-
yp=SCT only ). Blanks must be ”_”
LCDS Setting -> Feed
FeedMode= MAIN or 1-16 :
XEROX-like Parameter to use the input
bin as specified by STOCKSET / SCT
( MAIN=Default ) or to use the defined
bin as input bin ( e.g. for test purpose )
LCDS Setting -> Feed
MainBin= Integer 1-16
Defines the number of the special XE-
ROX input bin called MAIN.
LCDS Setting -> Feed
AuxBin= Integer 1-16
Defines the number of the special XE-
ROX input bin called AUX.
LCDS Setting -> Feed
AuxForm_Front= Definition of FORM / Overlay to be
used in the FEED=AUX case, to be
loaded on front pages, to be printed
from AUX tray. This option is designed
for fanfold printers
LCDS Setting -> Feed
AuxForm_Back= Like AuxForm_Front for the back page
of a sheet to be printed from the AUX
tray. Likewise this option is designed
for fanfold printers.
LCDS Setting -> Feed
Parameter General Description
Options and Syntax
Default
Description of the correspond-
ing GUI option
additional notes
To Next Page
Loading...
