Command Line Interface Printer Administrator
A29247-X2-X-8-7670 311
Overview of operands and functions with spladmin -s
Command: spladmin -p
Displays the status of all printers in the current system.
Command: spladmin –p NAME parameter
Displays the status of the printer called "NAME" in the current system.
Overview of operands and functions with spladmin -p XXX parameter
Call Display and Explanation
spladmin -
s
spool on
off
Enables the printing process after it has been dis-
abled.
Disables the printing process.
After termination of the spool, no further status in-
formation is displayed in the printer administration
window
spladmin -
s
protocol off
'1' – '5'
Disable internal spool trace.
Enable spool trace with special log level.
'spladmin -p NAME ...' Status of parameter relating printer 'NAME' only
'... printer' Display printer status
'... jobcl' Display active queue numbers
'... npro' Display the npro-time value
'... form' Dsiplay the current form name
'... automode' Display the status of the autostart feature
'... checkform' Display the status of the check-form feature
'... checkres' Display the status of the check-resolution feature
'... checkprn' Display the status of the check-name feature
'... checkcls' Display the status of the check-queue feature
spladmin -p XXX printer Printer status: active or inactive.
spladmin -p XXX jobcl Current job queue(s) for the printer
spladmin -p XXX npro Current NPRO time for the printer
spladmin -p XXX automode Automatic mode: active or inactive
The spool starts and stops the printer automati-
cally, if there is a job to print for that printer.
spladmin -p XXX form Form name for the printer.
To Next Page
Loading...
