Printer Administrator Command Line Interface
312 A29247-X2-X-8-7670
Command: spladmin –p NAME parameter option
Modify an option of the printer called "NAME" in the current system.
Overview of operands and functions with spladmin -p XXX parameter option
spladmin -p XXX check-
form
Check form and sequencing: active or inactive
The spool prefers jobs with the same form as the
job that is printing.
spladmin -p XXX checkres Check job resolution: active or inactive
The spool system ensures that only print jobs with
the same job-specific resolution and printer reso-
lution would be printed.
spladmin -p XXX checkprn Check destination printer: active or inactive
The spool system ensures that only print jobs with
the same job-specific destination printer and
printer name would be printed.
spladmin -p XXX checkcls Check job class: active or inactive
The spool system ensures that only print jobs with
the suitable job class would be printed.
'spladmin -p NAME ...' Commands relating printer 'NAME' only
'... printer' on | off | halt | reset | cancel,del[cp][jb]
cancel,hold[cp][jb] | cancel,int[cp][jb]
'... jobcl' {Queue} [add|rem] (Queue: 0-999)
'... npro' {NPRO value} (NPRO value: 0-12h)
'... form' {Form-Id}
'... automode' on | off
'... checkform' on | off | on,seq
'... checkres' on | off
'... checkprn' on | off
'... checkcls' on | off
Call Display and Explanation
spladmin -p XXX printer on Activates the logical printer XXX
off Deactivates the printing process for printer XXX.
halt Stops physical printing, but the backend process re-
mains active.
To Next Page
Loading...
