Command Line Interface Printer Administrator
A29247-X2-X-8-7670 313
reset Aborts currently active printer.
By entering the command, you can stop the backend
process abnormally without backend control.
Attention: Printing data can be lost !!!
cancel,
hold
Cancels the job currently printing on printer XXX and
keeps the print job for reprinting at a later time.
cancel,
holdcb
Cancels the job currently printing on printer XXX after
current filecopy and keeps the print job for reprinting
at a later time.
cancel,
holdjb
Cancels the job currently printing on printer XXX after
current jobcopy and keeps the print job for reprinting
at a later time.
cancel,
del
Cancels the job currently printing on printer XXX and
deletes it.
cancel,
delcp
Cancels the job currently printing on printer XXX after
current file-copy and deletes it.
cancel,
deljb
Cancels the job currently printing on printer XXX after
current job-copy and deletes it.
cancel,
int
Cancels the job currently printing on the specified
printer XXX and notes the number of the last printed
page. This enables printing to be resumed later at a
position of your choice.
cancel,
intcp
Cancels the job currently printing on the specified
printer XXX after current file-copy and notes the num-
ber of the last printed page.
cancel,
intjb
Cancels the job currently printing on the specified
printer XXX after current job-copy and notes the num-
ber of the last printed page..
spladmin -p XXX jobcl job-
queue
Assigns a job queue to a printer XXX
job queue = number of the job queue you want to
print (0-999).
add = adds a new queue to printer's queue list
rem = remove a queue from printer n
If either add nor rem follows the queue number; the
queue becomes the only queue assigned to printer.
Default queue = 0 (none).
Call Display and Explanation
To Next Page
Loading...
