Oki MC860 - MPT Assy;Mpt Hopping Roller;Separator;Pickup Roller

To Next Page

To Previous Page

Oki Data CONFIDENTIAL

43967002TH Rev. 1

175 /

4. Part Replacement

4.2.3.15 MPT Assy/MPT hopping roller/Separator/Pickup roller

(1) Remove the paper cassette.

(2) Open the MPT Assy

and remove the right and left stays by bending them

outside, and remove the MPT Assy

by sliding it to the right.

(3) Remove the MPT from the MPT Assy .

(4) Raise the pickup device upward and slide the feed paper roller

to the left and

remove it by bending the claws.

(5) R

otate the separator

centering around its pivot and remove the pivots at the two

locations. Remove the separator

and the two springs .

(6) Remove the pickup roller by bending the side surface of the frame.

Claw

Stay

Other manuals for Oki MC860