43967002TH Rev.1
236 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.10 Printer maintenance
5.10.1 Personality
Default setting of the PDL language that is supported by the respective destination
specification can be changed.
The PDL language that has been set to” Disable” by the PDL setting item will not be
displayed as the choices on the following menu: [SETUP]- [Admin Setup] - [Print Setup] .
At the same time, when the print data of the PDL language that has been set to “Disable”
is received, a message “”Invalid data is received” is displayed and the received data is
discarded.
5.10.1.1 IBM 5577
Value Default Display condition
Disable
Enable
Disable None
Set whether or not to support IBM 5577.
When the screen exits the service menu after this setting is changed, the MC860 reboots
automatically.
5.10.1.2 IBM PPR III XL
Value Default Display condition
Disable
Enable
Enable None
Set whether or not to support IBM PPR III XL.
When the screen exits the service menu after this setting is changed, the MC860 reboots
automatically.
5.10.1.3 EPSON FX
Value Default Display condition
Disable
Enable
Enable None
Set whether or not to support EPSON FX.
When the screen exits the service menu after this setting is changed, the MC860 reboots
automatically.
5.10.1.4 HP-GL/2
Value Default Display condition
Disable
Enable
Disable None
Set whether or not to support HP-GL/2.
When the screen exits the service menu after this setting is changed, the MC860 reboots
automatically.
To Next Page
Loading...
