Oki MC860 Maintenance Manual

Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
361 /
7.5.5.2 Print operation is not possible
If print operation is not possible by using the encrypted IPP printer, check the followings.
Establish connection by ”https://<printer IP address>.
1) If
the printer setting page is displayed, the followings are probable.
Take an appropriate measure by referring to the following items.
* Certificate is not created yet. (Or failed to create certificate.)
Refer to section “7.5.5.1.1 Is the certificate created?”.
* Certificate has been created but the SSL/TLS setting is turned off.
Refer to section “7.5.5.1.2 Is the certificate created?”.
2) If the printer setting page is displayed, the followings are probable.
Take an appropriate measure by referring to the following items.
* Version number of the browser is old.
Refer to section “7.5.5.1.3 Check version number of the Web browser”.
* Encryption strength has been set to Strong.
Refer to section “7.5.5.1.4 Confirm encryption strength of a printer”.
* The key exchange system of a printer is not supported by the browser.
(Compatibility problem).
* The
OS does not support the IPP (encrypted) printing.
Refer to section “7.5.5.2.1 Check OS (Operating System)”.
* IPP (encrypted) printer is not created yet.
Refer to section “7.5.5.2.2 Is the Printer created?”
* IPP setup of the Printer is not Enabled.
Refer to section “7.5.5.2.3 Is the IPP setting set to Enabled?”.
7.5.5.2.1 Check OS (Operating System)
The IPP print (encryption) function is supported by Windows 2000 and Windows XP only.
It is not supported by other operating systems.
7.5.5.2.2 Is the Printer created?
Printer may not be created normally.
To use the IPP print (encryption) function, the Printer must have been created by setting port
to URL” printer IP address>/ipp” when creating the Printer.
For more details of Printer creation method, refer to the User’s Manual (Advanced edition).
7.5.5.2.3 Is the IPP setting set to Enabled?”
The IPP setup may not be set to Enable.
As the default setting of printer, IPP has been set to Disable.
To use the IPP print (encryption) function, the IPP setup must have been set to Enable.
For the method of changing the IPP setup, refer to the User’s Manual (Advanced edition).

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb