Oki MC860 Maintenance Manual

43967002TH Rev.1
136 /
Oki Data CONFIDENTIAL
3. Installation
3.10.1.3 Connect the telephone line cable.
Connection of the telephone line cable is different in each country and location. Connect the
MFP to suit to the environment of each installation location using the following diagram as
reference.
Note!
• The MFP cannot be connected to the ISDN line. Terminal adapter is
required for ISDN line connection.
• Be sure to use the supplied telephone line cable. Use of any
telephone line cable other than what is supplied causes malfunction.
1. Connect the MFP to suit to the environment of each installation location.
To connect to public telephone line
(To use the MFP as the fax machine (without connecting telephone line to the MFP)
Connect the telephone line cable to [LINE connector] of the MFP.
To connect to public telephone line
(To connect to the telephone of the MFP)
Connect the telephone cable that is connected to the public telephone line (analog) to
the [LINE connector] of the MFP.
To connect to the ADSL environment
Connect the telephone cable that is connected to the ADSL modem to the [LINE
connector] of the MFP. Connect the external telephone machine to the [TEL connector]
of the MFP.
TEL connector
LINE connector
Telephone line cable
Public telephone line
(analog)
TEL connector
LINE connector
Telephone line cable
Public telephone line
(analog)
Cordless phone and
other external telephone machine
Public telephone line
(analog)
ADSL modem
Splitter
TEL connector
LINE connector
Telephone line
cable
Cordless phone and
other external telephone machine

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb