43967002TH Rev.1
260 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.12.1 Special startup operating procedure
Special startup operating procedure
1. While pressing the [INTERRUPT] key, turn ON the power of the MC860. The “0”
mark is displayed in the bottom left of the screen first. Then the “00” is displayed.
2. Press the ( ) key and the (#) key in this order. Then the code entry column of
the special mode is displayed on the screen.
3. Input code of the desired special mode in the code entry column. 4.
When the code input is complete, press the * key to terminate the code input.
4. When input by codes is completed, input by codes is ended pressing the ( ) key.
5. Press the (#) key to start the special startup processing.
5.12 Special startup
To Next Page
Loading...
