Oki MC860 Maintenance Manual

Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
372 /
2. Remove the followings.
• POWER cord, earth wire
• Cables
• Papers in the trays
3. Be sure to hold the MC860 with three persons or more to transport.
Note! After moving the MC860, be sure to release the mirror carriage lock before
turning ON the power. Set the mirror carriage transport mode to OFF.
When the MC860dtn and add-on tray unit are installed:
Remove the fall prevention foot and release the caster lock (at two locations) before
move.
After move, lock the casters and install the fall prevention foot to the original position.
For details, refer to “Add-on tray unit” (Basic Operation edition).
7.7.2 Transporting the MC860
The MFP is the precision equipment that can be damaged during transportation if it is poorly
packaged. Transport the MC860 by the following procedure.
1. Set the [Mirror carriage transport mode] to ON.
Press the < SETUP > key.
Enter the administrator password and press
[Enter].
Memo By default, Administrator password is
[a
aaaaa].
Press [User Install].
Press [Admin Setup]

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb