43967002TH Rev.1
206 /
Oki Data CONFIDENTIAL
4. Part Replacement
14-1 Guide-Eject-EX-L_Assy
Apply a small amount of
MOLYKOTE (EM-30L) to
the hatched area. (7 places)
Bearing Position (2 places)
EM-30L Class C
EM-30L Class C
Bearing Position (2 places)
EM-30L Class C
EM-30L Class C
Apply a small amount of MOLYKOTE
(EM-30L) to the hatched area. (7 places)
No grease at the paper running face.
No grease at the paper
running face.
Guide-Eject-EX-L
Apply normal amount of MOLYKOTE (EN-30L) to the surface of gear teeth,
shaft, and the flange portions
Em-30L Class C
Shaft-Assy.-Eject-(FD)
Shaft-Assy.-Eject
Apply normal amount of MOLYKOTE (EN-30L) to the surface of gear teeth,
shaft, and the flange portions
Em-30L Class C
14-2 Guide-Eject-EX-L_Assy
To Next Page
Loading...
