Oki MC860 - Page 210

43967002TH Rev.1
210 /
Oki Data CONFIDENTIAL
4. Part Replacement
18-2 Printer-Unit (PX736)
(1) Apply a small amount of MOLYKOTE(EM-30L) to the
hatched areas (Plate-Side-R and Plate-Side-L)
(2) Inset the shaft from the side of Plate-Side-R-Assy.
to the side of Plate-Side-L-Assy.
Shaft-Lift-UP
(3) Apply a small amount of MOLYKOTE(EM-30L)
to the shaft (Both ends)
(4) Move the shaft from side to side and revolve the
shaft for more effective lubrication
(1) (2)
(3) (4)
Apply a normal amount of MOLYKOTE
(EM-30L) to the hatched portions
EM-30L Class C
Apply a normal amount of MOLYKOTE
(EM-30L) to the hatched portions
EM-30L Class C
Shaft-Lift-UP
Gear-Reduction-L-UP
Gear-Reduction-L-UP4
Plate-Side-Assy.