Oki MC860 - Page 238

43967002TH Rev.1
238 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
LEVEL0
(1) Entering into the menu item.
Moving to XXXXX is executed by pressing the (2) key or (8) key.
Item selection is executed by (6) key.
Moving to XXXXX is executed by pressing the (6) key or (4) key.
Item selection after movement is executed by the (2) key or (8)
key.
XXXX
XXXX
During printing
Respective
voltages display
Transfer (TR)
voltage (1)
Transfer (TR)
voltage (2)
Charge (CH)
voltage
Supply (SB)
voltage
Develop (DB)
voltage
Environmental
level
(2) key
Toner sensor
Toner sensor
Status
Monitor
display
Motor control
evaluation function
Regist motor constant
speed
Timer values,
environmental
temperature
Fuser motor constant
speed timer
Value, fuser target
temperature
ID motor constant
speed timer value
BELT motor constant
speed
Timer value
Engine status display
Heater temperature
Environmental temperature
and humidity
Setup table
Transfer voltage
Transfer OFF voltage, belt
temperature
Side thermistor
Press the (4) key.
(2) key
(8) key
(8) key
* On the engine status display screen,
Ready is displayed normally. When an
error occurs, the error code details are
displayed.