Oki Data CONFIDENTIAL
7. Troubleshooting
43967002TH Rev. 1
355 /
7.5.5.1.1 Is the certificate created?
Log-on in as the administrator, and select “Security” “Encryption (SSL/TLS)”.
If the following screen is displayed, certificate of the printer is not created yet. (The same
screen is displayed when failed to create certificate.)
S
ol
ution: Create certificate by referring to the User’s Manual (Advanced edition).
7.5.5.1.2 Is the certificate created?
Log-on in as the administrator, and select “Security” “Encryption (SSL/TLS)”.
If the following screen is displayed, certificate has already been created, but the SSL/TLS
setting is turned [OFF].
Before creating certificate (default state)
Solution: Set the SSL/TLS setting to [ON].
To Next Page
Loading...
