Supported USB memory devices
12
12-4 d-Color MF552/452/362/282/222
12.2
12.2 Supported USB memory devices
USB memory devices that have the following specifications can be connected to this machine.
Note the following points when connecting a USB memory device to this machine.
- Insert USB memory device into USB port near the Touch Panel. Leave the USB port open at a position
close to the rear panel. Use it for optional device connection.
- When you are saving files into or printing files from a USB memory, do not disconnect it from the USB
port.
- Do not use USB devices (such as hard disk unit and a USB switching hub) except for a USB memory.
- When this machine is operating and when hourglass is displayed on the Touch Panel, do not insert or
remove the USB memory device to/from USB port.
- Do not disconnect the USB memory directly after connecting it.
Item Requirement
Interface Compatible with USB Version 1.0/2.0 interface
Format FAT32 format files
Security Securities such as data encryption and password lock shall be released, or
the security function shall be turned Off.
Memory size Up to 2 GB is recommended
• Devices with a memory size of 4 GB or greater may not operate cor-
rectly.
• A USB memory device, which is recognized as multiple drives, cannot
be used.
To Next Page
Loading...
