Olivetti d-Color MF552 - [Finishing] ([Public];[Personal];[Group]) ([Print])

d-Color MF552/452/362/282/222 15-27
15
[Finishing] ([Public]/[Personal]/[Group]) ([Print])
To display: [Box] - Select a User Box - [Open] - Select the file - [Print] - [Finishing]
Specify how to feed out printed sheets of paper.
Tips
- The Finisher is required to use the Staple function.
- To use the Punch function:
–The Finisher FS-534 and Punch Kit PK-520 or the Finisher FS-533 and Punch Kit PK-519 are re-
quired.
–The Finisher FS-535 and Punch Kit PK-521 or the Z Folding Unit ZU-606 are required (only for d-
Color MF552).
- To use the Half-Fold/Bind function:
–The Finisher FS-534 and Saddle Stitcher SD-511 are required.
–The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for d-Color MF552).
- To use the Tri-Fold function:
–The Finisher FS-534 and Saddle Stitcher SD-511 are required.
–The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for d-Color MF552).
- To use the Z-Fold function:
–The Finisher FS-535 and Z Folding Unit ZU-606 are required (only for d-Color MF552).
Settings Description
[Group/Sort] Select the output method when printing multiple sets of copies.
For details, refer to page 15-28.
[Offset] Select this item when sorting by copies or by page to feed out paper.
For details, refer to page 15-28.
[Staple] Select the binding positions for stapling the sheets.
For details, refer to page 15-29.
[Punch] Select binding positions when punching sheets.
For details, refer to page 15-29.
[Fold/Bind] Select how to fold or bind paper.
For details, refer to page 15-30.