15
15-30 d-Color MF552/452/362/282/222
Tips
- To use the Punch function:
–The Finisher FS-534 and Punch Kit PK-520 or the Finisher FS-533 and Punch Kit PK-519 are re-
quired.
–The Finisher FS-535 and Punch Kit PK-521 or the Z Folding Unit ZU-606 are required (only for
d-Color MF552).
- The number of punched holes varies depending on the country you are in.
[Fold/Bind] ([Public]/[Personal]/[Group]) ([Print])
To display: [Box] - Select a User Box - [Open] - Select the file - [Print] - [Finishing] - [Fold/Bind]
Select how to fold or bind paper.
Tips
- To use the Half-Fold/Bind function:
–The Finisher FS-534 and Saddle Stitcher SD-511 are required.
–The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for d-Color MF552).
- To use the Tri-Fold function:
–The Finisher FS-534 and Saddle Stitcher SD-511 are required.
–The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for d-Color MF552).
- To use the Z-Fold function:
–The Finisher FS-535 and Z Folding Unit ZU-606 are required (only for d-Color MF552).
Settings Description
[Half-Fold] Feeds out a printed sheet by folding it in two.
For details, refer to page 15-31.
[Center Staple & Fold] Staples and feeds out a printed sheet by folding it in two.
For details, refer to page 15-31.
[Tri-Fold] Feeds out a printed sheet by folding it in three.
For details, refer to page 15-32.
[Z-Fold] Z-folds the long side of a printed sheet before feeding it out.
For details, refer to page 15-32.
To Next Page
Loading...
