d-Color MF552/452/362/282/222 15-235
15
[Offset] ([External Memory]) ([Print])
To display: [Box] - [System] - [External Memory] - Select the file - [Print] - [Finishing] - [Offset]
Select this item when sorting by copies or by page to feed out paper.
If the Finisher or Job Separator JS-506 is installed, the printed sheets are fed out and stacked on top of
each other with each copy or page set staggered to separate them.
If the Finisher or Job Separator JS-506 is not installed, the printed sheets are fed out and sorted by copies
or page in an alternating crisscross pattern when the following conditions are satisfied.
- 8-1/2 e 11, A4, or B5 paper is used.
- Paper of the same size and type is loaded with the w orientation in one paper tray and with the v ori-
entation in another tray
- Auto Paper for the paper size setting is set.
[Staple] ([External Memory]) ([Print])
To display: [Box] - [System] - [External Memory] - Select the file - [Print] - [Finishing] - [Staple]
Select the binding positions for stapling the sheets.
Tips
- The Finisher is required to use the Staple function.
Settings Description
[Corner] Each set of printed sheets is stapled in a corner (top left or top right) before
being output.
[2 Position] Each set of printed sheets is stapled at two positions (in the top, left, or
right) before being output.
[Position Setting] Select the binding position.
To Next Page
Loading...
Need help?
General
