d-Color MF552/452/362/282/222 15-131
15
[Stamp Repeat] ([Secure Print]) ([Print])
To display: [Box] - [System] - [Secure Print] - Select the file - [Print] - [Application] - [Stamp/Composition] -
[Stamp Repeat]
Stamp such as "Copy" and "Private" are printed on the entire page.
Settings Description
[ON]/[OFF] Select [ON] to repeat stamping.
[Stamp Repeat Type] Select a stamp used. The date and time can also be printed.
• [Preset Stamp]: Select a preset stamp to be printed.
• [Registered Stamp]: Select a registered stamp to be printed.
• [Date/Time]: Select a format (type) of date and time to be printed.
• [Other]: Specify the job number, the machine's serial number, and dis-
tribution control number to be printed.
[Stamp Selection] The registration status of the stamp is displayed.
[Detail Setting] Select the color, density, size, and pattern overwriting of print characters if
necessary.
[Change/Delete Position] Allows to check, change or delete the stamp position settings if necessary.
You can change the stamp sequence and insert a space between stamps.
When you select up to four stamps, you can change their angle (within +/-
45 degrees).
To Next Page
Loading...
