15
15-152 d-Color MF552/452/362/282/222
[Original Settings] ([Annotation]) ([Save])
To display: [Box] - [System] - [Annotation] - Select a User Box to save the file - [Save] - [Application] - [Orig-
inal Settings]
Set the options to scan originals correctly based on their properties.
Settings Description
[Original Setting] Set the options to scan originals correctly based on their properties.
• [Mixed Original]: Even for an original with pages of different sizes, by
using ADF, you can scan data while detecting the size for each page.
For details, refer to page 15-153.
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught when scanning an original that is
thinner than plain paper. For details, refer to page 15-153.
• [Z-Folded Original]: Even folded originals, the size of the original can be
detected accurately. For details, refer to page 15-154.
• [Long Original]: Select this option when loading a long original that is
larger in the feeding direction than the full standard size (11 e 17 or A3).
For details, refer to page 15-154.
[Despeckle] Scan an original using the ADF while removing dust from the Slit Scan
Glass.
For details, refer to page 15-155.
[Blank Page Removal] Blank pages contained in the original loaded on ADF are skipped when the
original is scanned.
For details, refer to page 15-155.
[Binding Position] When scanning a 2-sided original, select the original binding position to
avoid the binding positions be reversed between the front and rear faces.
For details, refer to page 15-156.
[Original Direction] Specify the orientation of the loaded original.
For details, refer to page 15-156.
To Next Page
Loading...
