d-Color MF552/452/362/282/222 15-71
15
Tips
- The Finisher is required to use the Staple function.
- To use the Punch function:
–The Finisher FS-534 and Punch Kit PK-520 or the Finisher FS-533 and Punch Kit PK-519 are re-
quired.
–The Finisher FS-535 and Punch Kit PK-521 or the Z Folding Unit ZU-606 are required (only for
d-Color MF552).
- To use the Half-Fold/Bind function:
–The Finisher FS-534 and Saddle Stitcher SD-511 are required.
–The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for d-Color MF552).
- To use the Z-Fold function:
–The Finisher FS-535 and Z Folding Unit ZU-606 are required (only for d-Color MF552).
[Offset] ([Public]/[Personal]/[Group]) ([Combine])
To display: [Box] - Select a User Box - [Open] - Select multiple files - [Other] - [Combine] - [Finishing] -
[Offset]
Select this item when sorting by copies or by page to feed out paper.
If the Finisher or Job Separator JS-506 is installed, the printed sheets are fed out and stacked on top of
each other with each copy or page set staggered to separate them.
If the Finisher or Job Separator JS-506 is not installed, the printed sheets are fed out and sorted by copies
or page in an alternating crisscross pattern when the following conditions are satisfied.
- 8-1/2 e 11, A4, or B5 paper is used.
- Paper of the same size and type is loaded with the w orientation in one paper tray and with the v ori-
entation in another tray
- Auto Paper for the paper size setting is set.
To Next Page
Loading...
Need help?
General
