Optional settings before printing
14
14-12 d-Color MF552/452/362/282/222
14.2
14.2 Optional settings before printing
Change the color mode and print ([Color])
You can change the color mode settings, used for file storage in the User Box, and print the file in new color.
The Color Mode can be set to any of [Use Existing Color Setting], [Full Color], and [Black].
For details, refer to the following page.
- When you are using a User Box, refer to page 15-24.
- When you are using a User Box (Combine), refer to page 15-69.
- When you are using a Secure Print User Box, refer to page 15-114.
- When you are using an Annotation User Box, refer to page 15-162.
- When you are using an External Memory User Box, refer to page 15-232.
Enlarge or reduce an image ([Zoom])
You can zoom a file image and print it to the desired scale.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-25.
- When you are using a Secure Print User Box, refer to page 15-115.
- When you are using an Annotation User Box, refer to page 15-163.
Print on both sides of paper ([Simplex/Duplex])
Select to print on a single side or both sides of a sheet of paper.
If you print on both sides of paper, you can reduce paper usage by half. You can save more sheets by com-
bination of the Combine function.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-25.
- When you are using a User Box (Combine), refer to page 15-70.
- When you are using a Secure Print User Box, refer to page 15-115.
- When you are using an Annotation User Box, refer to page 15-163.
- When you are using an External Memory User Box, refer to page 15-233.
To Next Page
Loading...
Need help?
General
