Omron F3SG series User Manual

35
F3SG-R
User’s Manual
Chapter2 Interlock
System Operation and Functions
E
• Pre-Reset mode
The table below shows the relation between the ON/OFF states and external lines.
<Timing chart>
• Start Interlock
• Restart Interlock
Toff: Response time ON to OFF
Input
External Connection
PNP NPN
ON Vs-3 V to Vs 0 to 3 V
OFF 0V to 1/2 Vs, or open 1/2 Vs to Vs, or open
PNP output NPN output
PRERESET: Gray
S1 S2
S1
S2
Receiver Receiver
S1: Lockout/Interlock Reset Switch
S2: Pre-reset Switch
S1: Lockout/Interlock Reset Switch
S2: Pre-reset Switch
Power supply
0 VDC : Blue RESET : Yellow 24 VDC : Brown
PRERESET: Gray
0 VDC : Blue RESET : Yellow 24 VDC : Brown
0 VDC
+24 VDC
Power supply
0 VDC
+24 VDC
F39-JG

A-D F39-JG

A-D
Power
Beam state
RESET
OSSD
ON
OFF
ON
OFF
Unblocked
Blocked
Beam state
Unblocked
Blocked
ON
OFF
Power
RESET
OSSD
ON
OFF
ON
OFF
ON
OFF
Start Interlock: Enabled Start Interlock: Disabled
300 ms or more
50 ms or less
Toff x 10 or less
Beam state
RESET
OSSD
ON
OFF
ON
OFF
Unblocked
Blocked
Beam state
Unblocked
Blocked
RESET
OSSD
ON
OFF
ON
OFF
Restart Interlock: Enabled Restart Interlock: Disabled
ON
OFF
Power
ON
OFF
Power
300 ms or more
50 ms or less
Toff x 5 or less

Omron F3SG series Specifications

General

Type	Safety Light Curtain
Protection Rating	IP67
Connection	M12 connector
Detection Method	Infrared Light
Operating Temperature	-10°C to +55°C
Resolution	14mm, 25mm, 40mm
Standards	EN/IEC 61496-1, EN ISO 13849-1
Power Supply Voltage	24V DC ±10%