Omron SYSMAC FH Series

WWW.NNC.IR
Using Accounts
155
4
Using Tools
Vision System FH/FZ5 Series
User’s Manual (Z340)
1 When saving data to external memory, insert an external memory device into the Sensor
Controller.
2 In the Main Window, select [Security settings] from the [Tool] menu.
The [Security settings] dialog box is displayed.
3 Click the [Setting data] tab in the Item Tab Area.
4 Specify the destination folder and file name in the [Save to file] area.
5 Click the [Save] button.
Loading Security Settings
Use the following procedure to load a saved user account and user group settings into the Sensor Controller.
1 If the settings were stored in external memory, insert the external memory device containing
the security settings to load into the Sensor Controller.
2 In the Main Window, select [Security settings] from the [Tool] menu.
The [Security settings] dialog box is displayed.
3 Click the [Setting data] tab in the Item Tab Area.
4 Select the file to load from the [Load from file] area.
5 Click the [Load] button.