WWW.NNC.IR
Creating a Scene
52
Vision System FH/FZ5 Series
User’s Manual (Z340)
Creating a Scene
This section explains how to add processing units to a scene.
1 In the Main Window (layout 0), display the scene to edit.
Reference: Changing the Scene or Scene Group (p.60)
2 Click the [Edit flow] button.
The edit flow window is displayed.
3 Select the processing item to add from the processing item tree.
4 Click the [Append] button.
The selected processing item is added at the
bottom of the unit list (flow).
5 Add another processing unit if
necessary. Repeat the steps after 3.
6 Either click the icon of the processing unit to be set or click the [Set] button.
The Properties Tab Page is displayed. Set detailed conditions. The displayed contents depend on the
processing item.
7 Set the conditions.
The displayed contents depend on the processing item.
• Limitations on Settings
The number of image input processing items that can be used is limited.
Reference: About Limits on the Number of Image Input Processing Items Used (p.858)
Note
To Next Page
Loading...
