Omron SYSMAC FH Series User Manual

WWW.NNC.IR
1
Vision System FH/FZ5 Series
User’s Manual (Z340)
FH/FZ5 Manual Configuration
The following table gives the manual configuration of the FH/FZ5.
Conventions Used in This Manual
Symbols
The symbols used in this manual have the following meanings.
Use of Quotation Marks and Brackets
In this manual, menus and other items are indicated as follows.
Cat. No. Manual name Contents Main applications
2285550-0
FH Image Processing System
Instruction Manual
Provides FH-series specifications,
dimensions, part names, I/O
information, mounting information,
and wiring information.
Checking I/O and other
specifications and performing
installation and wiring
9524422-4
(FZ5-6/11)
FH5 Image Processing
System Instruction Manual
Provides FH5-series specifications,
dimensions, part names, I/O
information, installation information,
and wiring information.
9910002-2
(FZ5-L3)
Z340
(This manual)
Vision System FH/FZ5 Series
User’s Manual
Describes the software functions,
settings, and operations for using
FH/FH5-series Vision Sensors.
Any application other than the
above applications and
communications
Z341
Vision System FH/FZ5 Series
Processing Item Function
Reference Manual
Describes the functions, settings,
and operations of the processing
items that you can use with the FH/
FH5-series Vision Sensors.
Checking information on
processing items when designing
or manipulating measurement
flows
Use this manual together with the
User’s Manual.
Z342
Vision System FH/FZ5 Series
User’s Manual for
Communications Settings
Describes the functions, settings,
and communications methods for
communicating between FH/FH5-
series Vision Sensors and external
devices (e.g., a PLC).
The following communications
protocols are included.
Parallel, PLC Link, EtherNet/IP,
EtherCAT, and Non-procedure
Checking information on
communications functions
Z343
Vision System FH Series
Operation Manual for Sysmac
Studio
Describes the operating procedures
for setting up and operating FH-series
Vision Sensors from the Sysmac
Studio FH Tools.
Communicating with an NJ-series
Controller via EtherCAT
communications
Indicates relevant operational precautions that must be followed.
Indicates operation-related suggestions from OMRON.
[ ] Menu Indicates the menu names or processing items shown in the menu bar.
“” Item name Indicates the item names displayed on the screen.
IMPORTANT
Note

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English