Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Saving Settings before Turning OFF the Power and Restarting
44
Vision System FH/FZ5 Series
User’s Manual (Z340)
Turning OFF the LCD
(This function is supported only by the FZ5-600/1100-series LCD-integrated Controllers.)
You can turn OFF the LCD without turning OFF the Controller.
1 Click the [LCD off] button that is located
on the Measurement Manager Bar in the
lower right corner of the window.
A confirmation message is displayed.
2 Click [OK].
Power to the LCD is turned OFF.
Restoring Power to the LCD
(This function is supported only by the FZ5-600/1100-series LCD-integrated Controllers.)
Click the bottom edge of the LCD.
After a while, the LCD power will turn ON.

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English