Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Windows
35
1
Before Operation
Vision System FH/FZ5 Series
User’s Manual (Z340)
Main Window (Layout 1): Run Window (Default)
This window is used to perform actual measurements. The measurement results are output through the
communications interfaces.
If the Controller is ready to perform measurements, the RUN signal turns ON.
When this window is displayed, the FH/FZ5 is ready to perform measurements.
If a measurement trigger is input from an external device, the FH/FZ5 begins execution of measurement
processing according to the contents and sequence that is set in the measurement flow.
Names of the Parts of the Main Window (Layout 1): Run Window (Default)
The functions of each display window are the same as for the Main Window (layout 0).
The Toolbox Pane and Measurement Pane that are displayed on the Main Window (layout 0) are not
displayed.
(Layout modification can be used to change the layout.)
Use the following procedure to change to Main Window (layout 0).
Select [Switch layout] from the [Function] menu (default layout).
Note
Judgement
Pane
Information Pane
Flow Display
Pane
Detail Result
Pane
Image
Pane
Displays the
Properties
Window.
(p.84)
(p.83)
(p.83)
(p.85)
(p.84)
(p.34)

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English