Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Flow of Application
25
1
Before Operation
Vision System FH/FZ5 Series
User’s Manual (Z340)
Flow of Application
The following table shows the flow for using the FH/FZ5.
Procedure Description Reference
Preparations
Installation and Wiring
FH Instruction Manual
FZ5 Instruction Manual
↓
Turning ON Power
FH Instruction Manual
FZ5 Instruction Manual
↓
Language Selection in Dialog Box (only when the Sensor Controller is
started for the first time)
Reference: Selecting the
Language: [Language
Setting] (p.292)
↓
Main Window (Layout 0) Display
Reference: Adjustment
Windows and Run Windows
(p.68)
↓
Camera Adjustments (Display the settings dialog box for a Camera Image
Input processing item.)
Reference: Preparing the
Controller and Cameras
(p.70)
↓
Select [Tool] − [System settings], and then under [Startup setting], set the
settings for [Basic], [Communication], and [Operation mode].
Reference: Changing the
System Environment (p.263)
↓
Click the [Data save] button, and then select [Function] − [System restart].
Reference: Saving
Settings before Turning OFF
the Power and Restarting
(p.43)
Reference: Loading
Settings Data from the
Controller RAM Disk or an
External Memory Device to
the Sensor Controller (p.261)
↓
Select [Tool] − [System settings], and then set the settings for [Camera],
[Communication] and [Other].
Reference: Changing the
System Environment (p.263)
↓
Click the [Data save] button, and then select [Function] − [System restart].
Reference: Saving
Settings before Turning OFF
the Power and Restarting
(p.43)
Reference: Loading
Settings Data from the
Controller RAM Disk or an
External Memory Device to
the Sensor Controller (p.261)

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English