Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Using Accounts
154
Vision System FH/FZ5 Series
User’s Manual (Z340)
1 In the Main Window, select [Security settings] from the [Tool] menu.
The [Security settings] dialog box is displayed.
2 Click the [Operating restrictions] tab in the Item Tab Area.
3 Select the operations to restrict.
Operations that are not selected are not restricted.
4 Select the operations to be permitted by user groups (UG1 to UG7) on the right side
Operations that are not selected cannot be used by users belonging to that group.
5 Click the [Close] button.
Operation restrictions are set for the user groups.
Saving/Loading/Deleting the Security Settings
You can save user account and user group settings (security settings). You can load or delete saved settings.
Account setting data is not included in BKD files.
Saving Security Settings
You can save user account and user group settings to a RAM disk or an external memory device.
• During data transfer to external memory, do not remove the external memory device until the transfer is completed. Data
and the external memory may be corrupted.
• Timing for Saving Data in the Controller
Data is saved to the Controller only when the [Security setting] dialog box is closed with the [Close] button.
When the login window is ended by selecting [Cancel], data is not saved to the Controller. The set contents or loaded
contents are cleared by when the Controller is restarted.
• Remote Operation Security
The security settings are synchronized, but for users who are logged in, the security settings are managed separately on
the local side and remote side. Therefore, even if users are logged in on the local side, they must log in again on the
remote side.
IMPORTANT

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English