Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Alignment
306
Vision System FH/FZ5 Series
User’s Manual (Z340)
Settings for the External Device to Use
Set the parameters that describe the type and specifications of the external device to use.
Add the following machine setting processing item to the flow.
● Stage Data
If you are using a stage, use this processing item.
Refer to Stage Data of the Vision System FH/FZ5 Series Processing Item Function Reference Manual
(Cat No. Z341).
● Robot Data
If you are using a robot, use this processing item.
Refer to Robot Data of the Vision System FH/FZ5 Series Processing Item Function Reference Manual
(Cat No. Z341).
The settings for the machine setting processing item can be referenced by the following processing items.
• Vision Master Calibration
• PLC Master Calibration
• Convert Position Data
• Movement Single Position
• Movement Multi Points
The settings for the machine setting processing item can be referenced from other scenes.
The machine setting processing item can be registered only in one scene group, but it can be referenced from other the
scenes. This enables central management of the external device settings.
Note

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English