WWW.NNC.IR
Macro Reference
407
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
AddSystemData
Adds the system data.
Format
AddSystemData <dataIdent0>, <dataIdent1>, <data>
Parameter
Return value
None.
Description
Adds the data of identification information 1 specified in the <dataIdent1> parameter, which belongs to
identification information 0 specified in the <datdaIdent0> parameter, to the system data, and sets the value
specified in the <data> parameter in the added data.
If an identification name other than "PanDA" is specified in the <datadent0> parameter, an "Illegal function
call" error will occur.
If the system data of identification information 1 that belongs to the specified identification information 0 is
already registered, no action is taken and the process ends.
If an incorrect data type is specified for a parameter, a "Type mismatch" error will occur.
If an identification name that does not exist is specified in the <dataIdent0> parameter, an "Illegal function
call" error will occur.
If a character string longer than 255 characters is specified in the <dataIdent1> parameter, a "String too long"
error will occur.
If the format is written incorrectly, such as writing the macro function name incorrectly, omitting a comma, or
omitting a half-width space, a "Syntax error" error will occur.
Usage Cautions
• None.
Example
Adds the data of identification information 1, "LoggingCount", to the system data of identification information
0, "PanDA". Sets 20 for the setting data.
Parameter
name
Data type Description
<dataIdent0>
Character
string type
Data identification name of identification information 0 of system data to be added
(specify "PanDA")
<dataIdent1>
Character
string type
Data identification name of identification information 1 of system data to be added
<data>
Integer type
Double
precision real
number data
type
Character
string type
Value of the system data to add
AddSystemData "PanDA", "LoggingCount", 20
To Next Page
Loading...
Need help?
General
