Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Macro Reference
721
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
SetSceneTitle
Sets the title of a scene.
Format
SetSceneTitle <sceneNo>, <title>
Parameter
Return value
None.
Description
Sets the title specified in the <title> parameter in the title of the scene with the scene number specified in the
<sceneNo> parameter.
If a title with 32 or more characters is specified in the <title> parameter, the first 31 characters are set in the
title.
The scene title can be set by executing this macro function, or in the scene maintenance screen or flow edit
screen. (Reference: XEditing Scenes (p.62)) (Reference: XEditing Processing Units in Scenes (p.53))
If an incorrect data type is specified for a parameter, a "Type mismatch" error will occur.
If a non-existent number, numerical value, or combination of data types or values is specified for a parameter,
an "Illegal function call" error will occur.
If a character string longer than 255 characters is specified for a character string parameter, a "String too
long" error will occur.
If the format is written incorrectly, such as writing the macro function name incorrectly, omitting a comma, or
omitting a half-width space, a "Syntax error" error will occur.
Usage Cautions
• Execute this macro function when the BUSY signal or other measurement in progress signal is ON and
measurement is prohibited. (Reference: XState Transitions and Execution Timing (p.227))
Example
Sets the title of scene 2
Useable Modules
Scene Control Macro / Communication Command Macro
Supported Versions
Version 3.50 or later
Parameter
name
Data type Description
<sceneNo> Integer type Scene number (0 to 127) of the scene for which a title is to be set.
<title>
Character
string type
Scene title
SetSceneTitle 2, "Title"

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English