Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Macro Reference
775
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
UCase$
Converts an lower case letter to a upper case letter.
Format
UCase$(<string>)
Parameter
Return value
Returns the case converted character string as a string type value.
Description
Converts the lower case letters in the character strings specified in the <string> parameter to upper case.
If an incorrect data type is specified for a parameter, a "Type mismatch" error will occur.
If a character string longer than 255 characters is specified for a character string parameter, the 255-character string
before the 256th character is used for the macro function process. Characters after the 256th character will be discarded.
If a value is assigned to the return value variable or the variable is not used in an expression, a "Syntax error"
error will occur.
If the format is written incorrectly, such as writing the macro function name incorrectly, omitting a comma, or
omitting a half-width space, a "Syntax error" error will occur.
Usage Cautions
• None.
Example
Converts an lower case letter to a upper case letter.
The result is shown below.
Useable Modules
Unit Calculation Macro / Scene Control Macro / Communication Command Macro / Unit Macro
Supported Versions
Version 4.20 or later
Parameter
name
Data type Description
<string>
Character
string type
Character string contains an alphabet to be converted to upper case.
CHARA1$ = "Measurement Result = 100.0(OK)"
Rem Convert the lower case letters in the character strings to upper case.
CHARA2$ = UCase$(CHARA1$)
CHARA2$ = "MEASUREMENT RESULT = 100.0(OK)"

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English