2
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
2.39
8. Elevate the front of the vehicle at approx. 2 feet (60
cm)
e
.
9. Safely secure the vehicle.
10.Slowly fill the cooling system at the coolant reservoir
with 50/50 extended life coolant. Refer to Chapter 1 –
General Specifications for approximate coolant
system capacity.
NOTE
Elevating the unit will help reduce any air pockets in the
system when filling with coolant.
11. Fill the reservoir to the FULL COLD line.
12.Proceed to bleed the cooling system. See .
COOLING SYSTEM BLEEDING
ENGINE COOLING SYSTEM BLEEDING
1. Remove the hood panel.
2. Remove the coolant pressure cap
q
. Fill coolant to
the FULL COLD line
w
on the coolant tank.
3. Elevate the front of the vehicle at approx. 2 feet (60
cm)
e
.
MAINTENANCE
To Next Page
Loading...
Need help?
General
