5-90 Menus and Commands
6-00054-02 Rev A
was ejected
2 to allow the Scalar 1000 to
issue an UNLOAD command
to the Model 4001S, Model
7001S, Model 8001S, AIT3102,
AIT5002, AIT5102, AIT7002,
and NCTP drives before a
move if the cartridge is not
ejected by the host
3 to activate options 1 and 2
4 to disable automatic
cartridge recovery on PUT
failures
5 to activate options 1 and 4
6 to activate options 2 and 4
7 to activate options 3 and 4
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
To Next Page
Loading...
Need help?
General