R&S FSV3000 Series - Page 1055

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1055User Manual 1178.8520.02 ─ 01
MMEMory:LOAD<n>:LIMit <FileName>
Loads the limit line from the selected file in .CSV format.
Suffix:
<n>
.
irrelevant
Parameters:
<FileName> String containing the path and name of the CSV import file.
Example:
MMEM:LOAD:LIM 'C:\TEST.CSV'
Manual operation: See " Import " on page 480
MMEMory:STORe<n>:LIMit
<FileName>, <LimitLineName>
This command exports limit line data to an ASCII (CSV) file.
For details on the file format see Chapter 9.4.2.4, "Reference: Limit Line File Format",
on page 485.
Suffix:
<n>
.
irrelevant
Parameters:
<FileName> String containing the path and name of the target file.
<LimitLineName> Name of the limit line to be exported.
Example:
MMEM:STOR:LIM 'C:\TEST', 'UpperLimitLine'
Stores the limit line named "UpperLimitLine" in the file
TEST.CSV.
Manual operation: See " Export " on page 480
Checking the Results of a Limit Check
CALCulate<n>:LIMit<li>:CLEar[:IMMediate]....................................................................1055
CALCulate<n>:LIMit<li>:FAIL?...................................................................................... 1055
CALCulate<n>:LIMit<li>:CLEar[:IMMediate]
This command deletes the result of the current limit check.
The command works on all limit lines in all measurement windows at the same time.
Suffix:
<n>
.
Window
<li> irrelevant
Example:
CALC:LIM:CLE
Deletes the result of the limit check.
CALCulate<n>:LIMit<li>:FAIL?
This command queries the result of a limit check in the specified window.
Analyzing Measurements (Basics)