R&S FSV3000 Series - Page 1150

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1150User Manual 1178.8520.02 ─ 01
Query parameters:
<ChannelName> Optional SCPI parameter.
String containing the name of a measurement channel.
<Parameter> Optional SCPI parameter.
String containing the name of a parameter that you can syn-
chronize.
Return values:
<SynchronizableWindow><char_data>
'All Windows'
All windows can be synchronized. This value is always returned
if no parameters are provided with the command.
Comma-separated list of strings
String containing the names of the measurement windows that
can be synchronized.
This value is only available for marker coupling, which can be
set independently of the measurement window.
Example:
INST:COUP:USER:WIND:LIST?
Result:
'All Windows'
Example:
INST:COUP:USER:WIND:LIST? 'Analog
Demod','Frequency Marker 1'
Result:
'All Windows','1','2','3','4','5','6'
Usage: Query only
Manual operation: See "Specifics for Window" on page 637
14.10.11.3 Generator Coupling
INSTrument:COUPle:GENerator:CENTer:OFFSet............................................................1150
INSTrument:COUPle:GENerator:CENTer[:STATe]............................................................1151
INSTrument:COUPle:GENerator:RLEVel:OFFSet............................................................ 1151
INSTrument:COUPle:GENerator:RLEVel[:STATe]............................................................ 1151
INSTrument:COUPle:GENerator:STATe..........................................................................1152
INSTrument:COUPle:GENerator:CENTer:OFFSet <Frequency>
Defines a fixed offset to the center frequency of the R&S FSV/A for the coupled signal
generator.
This command requires the INSTrument:COUPle:GENerator:STATe and the
INSTrument:COUPle:GENerator:CENTer[:STATe] to be ON.
Parameters:
<Frequency> Default unit: HZ
Configuring the R&S FSV/A