R&S FSV3000 Series - Page 338

Common Measurement Settings
R&S
®
FSVA3000/ R&S
®
FSV3000
338User Manual 1178.8520.02 ─ 01
Remote command:
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<gen>:ADDRess on page 935
SYSTem:COMMunicate:TCPip:RDEVice:GENerator<gen>:ADDRess
on page 936
Reference
Selects the internal R&S FSV/A or an external frequency reference to synchronize the
R&S FSV/A with the generator (default: internal).
Remote command:
SOURce<si>:EXTernal<gen>:ROSCillator[:SOURce] on page 934
Edit Generator Setup File
Displays the setup file for the currently selected Generator Type in read-only mode in
an editor.
Although the existing setup files are displayed in read-only mode in the editor, they can
be saved under a different name (using "File > SaveAs").
Be careful, however, to adhere to the required syntax and commands. Errors are only
detected and displayed when you try to use the new generator (see also "Displayed
Information and Errors" on page 335).
For details, see "Generator Setup Files" on page 329.
Frequency Min / Frequency Max
For reference only: Lower and upper frequency limit for the generator.
Level Min / Level Max
For reference only: Lower and upper power limit for the generator.
Measurement Settings
Access: [INPUT/OUPUT] > "External Generator Config" > "Measurement Configura-
tion" tab
Data Input and Output