R&S FSV3000 Series - Page 433

Common Analysis and Display Functions
R&S
®
FSVA3000/ R&S
®
FSV3000
433User Manual 1178.8520.02 ─ 01
9.3.2.2 General Marker Settings
Some general marker settings allow you to influence the marker behavior for all mark-
ers.
Marker Table Display ..................................................................................................433
Marker Info .................................................................................................................433
Marker Stepsize ......................................................................................................... 434
Defining a Fixed Reference.........................................................................................434
Marker Table Display
Defines how the marker information is displayed.
"On"
Displays the marker information in a table in a separate area beneath
the diagram.
"Off"
No separate marker table is displayed.
If Marker Info is active, the marker information is displayed within the
diagram area.
"Auto"
(Default) If more than two markers are active, the marker table is dis-
played automatically.
If Marker Info is active, the marker information for up to two markers
is displayed in the diagram area.
Remote command:
DISPlay[:WINDow<n>]:MTABle on page 988
Marker Info
Turns the marker information displayed in the diagram on and off.
Marker Usage