R&S FSV3000 Series - Page 432

Common Analysis and Display Functions
R&S
®
FSVA3000/ R&S
®
FSV3000
432User Manual 1178.8520.02 ─ 01
Remote command:
CALCulate<n>:MARKer<ms>:LINK:TO:MARKer<md> on page 986
CALCulate<n>:DELTamarker<ms>:LINK:TO:MARKer<md> on page 983
CALCulate<n>:DELTamarker<m>:LINK on page 983
Assigning the Marker to a Trace
The "Trace" setting assigns the selected marker to an active trace. The trace deter-
mines which value the marker shows at the marker position. If the marker was previ-
ously assigned to a different trace, the marker remains on the previous frequency or
time, but indicates the value of the new trace.
If a trace is turned off, the assigned markers and marker functions are also deactiva-
ted.
Remote command:
CALCulate<n>:MARKer<m>:TRACe on page 987
Select Marker
The "Select Marker" function opens a dialog box to select and activate or deactivate
one or more markers quickly.
Remote command:
CALCulate<n>:MARKer<m>[:STATe] on page 987
CALCulate<n>:DELTamarker<m>[:STATe] on page 985
All Marker Off
Deactivates all markers in one step.
Remote command:
CALCulate<n>:MARKer<m>:AOFF on page 986
Marker Usage