R&S FSV3000 Series - Page 573

General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
573User Manual 1178.8520.02 ─ 01
Theme ........................................................................................................................573
Screen Colors ............................................................................................................ 573
Print Colors ................................................................................................................ 573
Showing Print Colors on Display.................................................................................574
Modifying User-Defined Color Assignments............................................................... 574
└ Selecting the Object......................................................................................575
└ Predefined Colors ........................................................................................ 575
└ Preview ........................................................................................................ 575
Defining User-specific Colors......................................................................................576
Restoring the User Settings to Default Colors............................................................ 576
Theme
The theme defines the colors and style used to display softkeys and other screen
objects.
The default theme is "IndustrialDark" .
Remote command:
DISPlay:THEMe:SELect on page 1121
Screen Colors
Two different color sets are provided by the instrument, a third user-defined set can be
configured.
The default color schemes provide optimum visibility of all screen objects when regard-
ing the screen from above or below. Default setting is "Default Colors 1" .
If "User Defined Colors" is selected, a user-defined color set can be defined (see
"Defining User-specific Colors" on page 576).
Remote command:
DISPlay:CMAP<it>:DEFault<ci> on page 1120
Print Colors
Defines the color settings used for printout.
Display Settings