R&S FSV3000 Series - Page 904

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
904User Manual 1178.8520.02 ─ 01
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
No data correction is performed based on the external preampli-
fier
ON | 1
Performs data corrections based on the external preamplifier
*RST: 0
Example:
INP:EGA ON
INPut<ip>:GAIN:STATe
<State>
This command turns the internal preamplifier on and off. It requires the optional pream-
plifier hardware.
For R&S FSV/A44 or higher models, note the restrictions described in " Preamplifier "
on page 372.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST: 0
Example:
INP:GAIN:STAT ON
INP:GAIN:VAL 15
Switches on 15 dB preamplification.
Manual operation: See " Preamplifier " on page 372
INPut<ip>:GAIN[:VALue] <Gain>
This command selects the gain if the preamplifier is activated (INP:GAIN:STAT ON,
see INPut<ip>:GAIN:STATe on page 904).
The command requires the additional preamplifier hardware option.
For R&S FSV/A44 or higher models, note the restrictions described in " Preamplifier "
on page 372.
Setting Basic Measurement Parameters