R&S FSV3000 Series - Page 970

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
970User Manual 1178.8520.02 ─ 01
Example:
CALC:SGR:TST ON
Activates the time stamp.
CALC:SGR:TST:DATA? ALL
Returns the starting times of all frames sorted in a descending
order.
Usage: Query only
Manual operation: See " Time Stamp " on page 509
CALCulate<n>:SGRam:TSTamp[:STATe] <State>
CALCulate<n>:SPECtrogram:TSTamp[:STATe] <State>
This command activates and deactivates the time stamp.
If the time stamp is active, some commands do not address frames as numbers, but as
(relative) time values:
●
CALCulate<n>:DELTamarker<m>:SPECtrogram:FRAMe on page 1006
●
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe on page 1002
●
CALCulate<n>:SPECtrogram:FRAMe:SELect on page 967
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:SGR:TST ON
Activates the time stamp.
Manual operation: See " Time Stamp " on page 509
Configuring the Color Map
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault................................................................970
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault........................................................970
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer..................................................................971
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer.........................................................971
DISPlay[:WINDow<n>]:SGRam:COLor:SHAPe................................................................. 971
DISPlay[:WINDow<n>]:SPECtrogram:COLor:SHAPe.........................................................971
DISPlay[:WINDow<n>]:SGRam:COLor:UPPer.................................................................. 971
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer..........................................................971
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]................................................................972
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]........................................................972
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault
This command restores the original color map.
Analyzing Measurements (Basics)