To Next Page

To Previous Page

Remote Control Commands

R&S

SMB100A

364Operating Manual 1407.0806.32 ─ 21

Example:

LIST:DEXC:MODE IMP

determines that ASCII files with frequency and level value pairs

are imported into list mode lists.

LIST:DEXC:AFIL:SEL '/var/list.csv'

selects the ASCII file list.csv for import.

LIST:DEXC:SEL '/var/list_imp'

determines the destination file list_imp.

LIST:DEXC:EXEC

imports the ASCII file data into the list mode file.

Usage: Event

Manual operation: See "Import / Export - List Mode" on page 195

[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>

Selects if list mode lists should be imported or exported. Depending on the selection

here, the file select command defines either the source or the destination for list mode

lists and ASCII files.

Parameters:

<Mode> IMPort | EXPort

*RST: IMPort

Example:

LIST:DEXC:MODE IMP

selects that ASCII files with frequency and level value pairs are

imported and transferred into list mode lists.

LIST:DEXC:AFIL:SEL '/var/list.csv'

selects that ASCII file list.csv is imported.

LIST:DEXC:SEL '/var/list_imp'

selects that the ASCII file list.csv is imported into list mode

list list_imp.

Manual operation: See "Mode - List Mode" on page 194

[:SOURce<hw>]:LIST:DEXChange:SELect <Filename>

Selects the list mode list to be imported or exported.

The list mode files are stored with the fixed file extensions *.lsw in a directory of the

user's choice. The directory applicable to the commands is defined with the command

MMEMory:CDIR. A path can also be specified in command SOUR:LIST:DEXC:SEL, in

which case the files are stored or loaded in the specified directory.

Parameters:

SOURce Subsystem

R&S SMB100A User Manual

Other manuals for R&S SMB100A